Husky 48WC01BP-THD Bedienerhandbuch PDF herunterladen (Seite 7)

Note: Holes in back of cabinet are spaced to allow

mounting on studs with 16-in centers or 24-in centers.

Leave outside holes open to mount to studs on 24-in

centers. To mount to 16-in centers you will need to drill

thru the back panels using the holes provided in the top

cap from the inside.

OPTION 2

WALL/STUD INSTALLATION

Items Needed:

BB - 1/4-20 x 3/4in Button Head Screw (Qty: 4)

DD - 1/4-20 Flange Nut (Qty: 4)

NOTE: Option 2 is for hanging cabinet directly on wall.

Holes are provided for studs on 16-in and 24-in centers.

Assembly shown for installation on 16-in centers.

Process:

• Assemble as shown using (4) BB screws and (4) DD nuts.

• Finger tighten.

Process:

• Attach (1) LL and (1) MM hinge to B door using (4) EE

screws, (4) FF washers and (4) GG nuts.

• Wrench tighten.

• Repeat for other door.

NOTE: The hinges for both doors MUST be mounted so

the hinge pin points UP at the TOP of the door and DOWN

at the bottom of the door.

Items Needed:

A - Door Right (Qty: 1)

B - Door Left (Qty: 1)

LL - Left Hinge (Qty: 2)

MM - Right Hinge (Qty: 2)

EE - #10-24 x 1/2in Carriage Bolt (Qty: 8)

FF - 3/16in Washer (Qty: 8)

GG - 10-24 Keps Nut (Qty: 8)

DOOR CONSTRUCTION

24-in (61cm)

16"-in (40.6cm)

Step 9 Option 2 Result

Step 10 Result

Figure 9.1

Figure 10.1

Figure 9.2

Figure 10

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Keine Kommentare

Husky 48WC01BP-THD Bedienerhandbuch Seite 7