Husky 48WC01BP-THD Bedienerhandbuch PDF herunterladen (Seite 11)

Process:

• Option (2) is for hanging cabinet directly on wall. Holes

are provided for studs on 16-in and 24-in centers.

Assembly shown for installation on 16-in centers.

• Align Wall Cabinet with studs.

• Mark and drill (2) 1/8-in pilot holes.

Note: Use outside holes for mounting to studs on 24-in

centers. Use inside set of holes for mounting to studs

on 16-in centers. (The ones drilled out from step 9,

option 2.)

• Attach Wall Cabinet to studs using appropriate

hardware as dened by your local building code.

Process:

• Option (1) is for hanging the cabinet on Husky®

Trackwall only. If hanging cabinet directly on wall go to

Option (2).

• With assistance hook Hanger Bracket over Trackwall

and slide down into place.

Warning

Wall Cabinet MUST be attached to two studs in a wood

frame wall. Use appropriate hardware per your local

building codes. Use two or more people to move and

assemble cabinet. Cabinet must be mounted level.

Failure to do so may cause personal injury or product

damage.

Items Needed:

Drill

1/8in Drill Bit

Mounting hardware as dened by your local building code.

OPTION 2

WALL/STUD INSTALLATION

MOUNTING UNIT

OPTION 1

HUSKY® TRACKWALL INSTALLATION

Figure 16.5

16-in Centers

24-in Centers

Hook over trackwall and

slide down into place.

Figure 16

Step 16 Option 1 Result

Note: Unit cannot be placed over a joiner section of

Trackwall. Unit must be hung either left or right of

joiner and then slid over the joiner.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare

Husky 48WC01BP-THD Bedienerhandbuch Seite 11

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Husky 48WC01BP-THD