Husky 48WC01BP-THD Bedienerhandbuch PDF herunterladen (Seite 6)

OPTION 1

HUSKY® TRACKWALL INSTALLATION

Items Needed:

BB - 1/4-20 x 3/4in Button Head Screw (Qty: 4)

DD - 1/4-20 Flange Nut (Qty: 4)

RR - Bracket - Wall

J - Hanger Bracket

Process:

• Option 1 is for hanging the cabinet on Husky® Trackwall

only. If hanging cabinet directly on wall go to Option 2.

• Attach J bracket, as shown using, (4) BB screws and

(4) DD nuts.

• Finger tighten.

• Remove the two BB screws and DD nuts from the center

of the unit.

• Place RR on the back of the unit and secure with the BB

screws and DD nuts removed earlier.

• Finger tighten.

SQUARE THE CABINET

• Square the cabinet and wrench tighten all bolts.

NOTE: be sure all hardware is fully seated

before tightening.

Process:

• Place G panel overlapping H panel and secure the top

and bottom outside corners with square mounting holes

with (2) AA bolts, (2) CC washers, and (2) DD nuts.

• Finish securing G to H with (3) BB screws and

(3) DD nuts.

• Finger tighten.

• Repeat for other side

ATTACH BACK OUTER PANELS

Items Needed:

G - Back Outer (Qty: 2)

AA - 1/4-20 x 5/8in Carriage Bolt (Qty: 4)

BB - 1/4-20 x 3/4in Button Head Screw (Qty: 6)

CC - 5/16in Washer (Qty: 4)

DD - 1/4-20 Flange Nut (Qty: 10)

Figure 7

Step 7 Result

Figure 9

Step 9 Option 1 Result

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

Keine Kommentare

Husky 48WC01BP-THD Bedienerhandbuch Seite 6