Husky 28WC01BP-THD Bedienerhandbuch PDF herunterladen (Seite 8)

Process:

• Place the grommets JJ in the holes in D and G.

Items Needed:

JJ - Grommet (Qty: 2)

OPERATION

Process:

• Align Wall Cabinet with studs.

• Mark and drill (2) 1/8-in pilot holes. Note Use outside

holes for mounting to studs on 24-in centers. Use inside

set of holes for mounting to studs on 16-in centers.

• Attach Wall Cabinet to studs using appropriate hardware

as dened by your local building code.

SHELF ADJUSTMENT

• Empty shelf.

• Remove fasteners.

• Rotate shelf upward and pull forward, as shown.

• Move shelf to desired location.

• Insert back of shelf in notches, rotate shelf into place

and reinstall fasteners.

16-in centers

24-in centers

Figure 14

FINAL MOUNTING OPTION 2

LOCKING AND UNLOCKING THE UNIT

Items Needed:

Mounting hardware as dened by your local building

code.

Locking the Unit:

• Make sure doors are fully closed.

• Insert the key and turn fully to the left.

• Remove key.

Unlocking the Unit:

• Insert the key and turn fully to the right.

• Remove key.

Process:

Note: Option 1 is for hanging cabinet on Husky®

Trackwall. If hanging cabinet directly on wall,

go to option 2.

• With assistance hook bracket H over Trackwall and

slide down into place.

Note: Unit cannot be placed over a Joiner Section of

Trackwall. Unit must be hung either left or right of the

Joiner and then slid over the joiner.

Hook over Trackwall and

slide down into place.

Figure 13

FINAL MOUNTING OPTION 1

Bracket-Wall

GROMMET INSTALLATION

Figure 12

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare

Husky 28WC01BP-THD Bedienerhandbuch Seite 8

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Husky 28WC01BP-THD