Husky H4420 Bedienerhandbuch

Stöbern Sie online oder laden Sie Bedienerhandbuch nach Elektrische Schraubenschlüssel Husky H4420 herunter. Husky H4420 Instructions / Assembly Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 2
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
6
Operation
1
Operating the impact wrench
This 3/8" Impact Wrench is designed to operate on 90 PSIG.
Lower pressure (below 90 PSIG) will reduce performance
of the tool. Higher air pressure (over 90 PSIG) raises the
performance of the tool beyond its rated capacity and
could cause serious damage to the tool and the user.
2
Changing the output torque direction
This tool features a reverse switch to change the
output torque direction to tighten (assemble) or loosen
(disassemble) the bolt or fastener.
Control the output torque direction by pushing the reverse
switch button to the F (Forward) or R (Reverse) position to
change the direction.
3
Changing the output torque level
This tool features the combined reverse/power
management switch. This tool operates in the maximum
power in the Reverse position and has three steps in the
Forward position.
Turn the regulator until the desired output torque
level is achieved. The position with the smallest
circle has the least amount of power and the position
with the largest circle has the most amount of
power. The settings on the regulator are only for
reference and do not denote a specic power output.
4
Installing and removing the impact
sockets
WARNING: Disconnect the tool from the air supply before
servicing or changing accessories. Always use sockets rated
for impact wrenches.
To install the impact socket:
Disconnect the tool from the air source.
Select the suitable and desirable socket size.
Press t the anvil into the socket.
To remove the impact socket:
Disconnect the tool from the air source.
Use your hand or a suitable tool to remove the socket.
Seitenansicht 0
1 2

Inhaltsverzeichnis

Seite 1 - Operation

6 Operation1 Operating the impact wrench □ This 3/8" Impact Wrench is designed to operate on 90 PSIG. Lower pressure (below 90 PSIG) will reduce

Seite 2 - Maintenance

7 HUSKYTOOLS.COM Please contact 1-888-43-HUSKY for further assistance.Operation (continued)5 Tightening or loosening the bolt or fastener WARNIN

Kommentare zu diesen Handbüchern

Keine Kommentare